Processing technology: laser engraving, impact-etching, laser and impact marking, laser cutting (replaceable working heads)
​
Processed materials: (laser and impact modes) stone, glass, metal, plastic, wood, etc.

​

Number of coordinates (drives): 4 coordinates (X,Y1,Y2,Z) with ball screw drive 

​

Drive type: ball screw, dustproof, backlash-free, with tension adjustment

​

Working area (maximum image sizes per installation)

• 400*600 mm

• 700*1100 mm

• 700*1400 mm

• 800*1600 mm

 

Overall dimensions of the machine:

• 800 × 1000 × 350 mm (working area 400*600 mm)

• 1200 × 1500 × 350 mm (working area 700*1100 mm)

• 1200 × 1900 × 350 mm (working area 700*1400 mm)

• 1400 × 2100 × 350 mm (working area 800*1600 mm)

​

Machine weight:

• 25 kg (400*600 mm)

• 40 kg (700*1100 mm)

• 50 kg (700*1400 mm)

• 60 kg (800 *1600 mm)

​

Supply voltage: ~220 V / 50 Hz, ~127 V / 60 Hz

​

Power consumption: no more than 500 W

​

Overall dimensions and thickness of the workpiece: not limited

​

Positioning accuracy: 0.025 mm, no backlash

​

Image dot density: adjustable from 10 to 400 dots/cm, maximum 160,000 dots/cm2 (1016 dpi)

​

Maximum permissible tilt (non-flatness) of the workpiece: up to 100 mm per 1000 mm (depending on the feed speed)

​

Number of semitones (gradations of impact force): 256 (limited by computer image format)

​

Laser engraving mode

Emitter power: 20 to 40W 

Laser emitter type: laser diode

Emitter service life: up to 20000 hours

Engraving speed: up to 500 mm/s (30,000 mm/min)

Cooling type: air, laser head temperature control

Focus setting: automatic

Workpiece surface monitoring: by preliminary scanning of the workpiece surface

Impact-etching mode

Workpiece surface level monitoring: yes, electronic level sensor

Gap setting method: automatic

Engraving modes: point, amplitude, combined

Engraving depth: 0.1 to 0.8 mm (on soft materials up to 1.8 mm)

Performance: 300 x 400 mm image - from 20 minutes (set by operating mode)

Tool (needle) service life: minimum 10 images 300 x 400 mm (up to 100 images 300 x 400 mm with regrinding)

Marking (vector engraving)

Marking mode (vector engraving): yes

​

Laser cutting
Cutting sheet material: wood, plastic

 

Requirements for a personal computer: any computer with the operating system Windows 10, 8, 7, Vista, XP SP3.

​

Connection method to computer: USB